Home › Bulk offers › Alfalfa Leaf Extract 10:1 — Bulk 25 kg
Representative packaging · 25 kg net · batch label carries lot no., mfg and expiry dates
Bulk lot HB-BLK-003 · Botanical extracts
Alfalfa Leaf Extract 10:1 — Bulk 25 kg
Medicago sativa · leaf
$1,034.39 per 25 kg pack · $41.38/kg
Alfalfa leaf extract 10:1 is a brown, water-soluble fine powder made from the leaf of Medicago sativa by hydroalcoholic extraction, manufactured in India and supplied by Herbuno in 25 kg packs for supplement, food and cosmetic manufacturers. Every pack ships with the current batch certificate of analysis, and the current batch passes a full contaminant panel covering heavy metals, aflatoxins, ethylene oxide and pesticide residues.
Technical specifications
| Botanical name | Medicago sativa L. |
|---|---|
| Plant part | Leaf |
| Extract ratio | 10:1 |
| Extraction solvent | Hydroalcoholic |
| Form | Brown fine powder |
| Solubility | Soluble in water |
| Particle size | NLT 90% through 80 mesh |
| Identification | TLC against reference sample |
| Country of manufacture | India |
| Pack | 25 kg net, lined corrugated carton or HDPE drum |
| Shelf life | 36 months in original sealed pack |
Current batch and quality verification
The current batch was manufactured in June 2026 and expires in May 2029. Identity is confirmed by TLC against a reference sample. Arsenic, cadmium, lead and mercury are all below the limit of quantification (0.05 mg/kg). Aflatoxins B1, B2, G1 and G2, ethylene oxide (GC-MS) and multi-residue pesticides (LC-MS/MS and GC-MS/MS) are all below the limit of quantification. Total plate count is below 1,000 CFU/g, and E. coli and Salmonella are absent in 25 g. The full results table is shown below, and the COA is issued on Herbuno letterhead.
Sourcing and qualification
- A 10:1 ratio describes how much dried leaf goes into each kilogram of extract; it is not a potency assay. If your formula needs a measured marker such as saponins or coumestrol, ask for a standardised grade instead.
- This batch was tested for ethylene oxide and multi-residue pesticides by mass spectrometry, with both below the limit of quantification. That matters for EU buyers, where ethylene oxide limits on Indian botanicals are strictly enforced.
- The COA carries allergen-free and GMO-free statements. A tapped bulk density of about 76 g/100 mL is relevant if you are filling capsules.
Frequently asked questions
Is a 10:1 ratio the same as a standardised extract?
No. A ratio extract tells you the input-to-output concentration, not the amount of any single compound. Identity is confirmed by TLC against a reference sample.
Is the ratio stated before or after any carrier?
We confirm this, together with the full percentage composition, in writing on request before you order.
Can I order more than one pack or get a sample?
Yes. Order any number of 25 kg packs at checkout at the listed price. For a sample from the current batch, extra documents or a freight estimate on a large volume, use the request form on this page.
Current batch — full COA results
| Test | Specification | Result |
|---|---|---|
| Identification (TLC) | Identical to reference | Complies |
| Sieve, 80 mesh | NLT 90% | 92.71% |
| Moisture | <10.0% | 5.17% |
| Tapped bulk density | 40–80 g/100 mL | 76.27 g/100 mL |
| Arsenic / Cadmium / Lead / Mercury | ≤1.1 / 1.5 / 2.5 / 1.0 ppm | Below LOQ (0.05 mg/kg) |
| Aflatoxins B1, B2, G1, G2 | ≤5 / 2 / 2 / 2 ppb | Below LOQ |
| Ethylene oxide (GC-MS) | ≤0.01 mg/kg | Below LOQ |
| Pesticide residues (LC-MS/MS, GC-MS/MS) | ≤0.01 mg/kg | Below LOQ |
| Total plate count | <10,000 CFU/g | <1,000 CFU/g |
| Yeast & moulds | <100 CFU/g | <100 CFU/g |
| Coliforms | <10 CFU/g | <10 CFU/g |
| E. coli / Salmonella | Absent/25 g | Absent/25 g |
Results from the lot's certificate of analysis, issued on Herbuno letterhead, unaltered.